Specifications
CPU: ATMEL ATmega8 8MHz (the internal organs OSC)
Decoder:VS1001K(DAC/DSP)
Supports format:MPEG 1&2 for layer 3 and layer 3's 2.5 extensions
all sample rates and bit rates(at most 256kbps verification)
Supports VBR(variable bit-rate)
Memory medium: SD (MMC) Card (checked 64MB and 128MB), SPI MODE , FAT16 Onry (Supports VFAT)
LCD: SC1602BC (16x2) ,Title & artist (ID3TagV1 indicating), play time, volume ,power supply voltage.
Operation button: Power on& playback,stop & power off,fast forward,review,volume up&down
Electric power consumption: Approximately 45mA at 3.3V
Program source schematic(Sorry,Tr is not BRC133 but BCR133. The capacitor connecting to Atmega8_pin21 is 0.1uF.)
Practical machine 1
From prototype modification point
Power source AA dry cell ,DC-DC converter (Texas:TPS60200)
When performing adding the pause
supplied the case (110x70x32mm)
Electric power consumption approximately 180mW (with alkaline electric battery approximately 15 hour continuous duty yeses)
Program source schematic(Sorry,Tr is not BRC133 but BCR133. The capacitor connecting to Atmega8_pin21 is 0.1uF. )
Practical machine 2
Modification point from of practical machine 1
DC-DC converter modification to MAX778L
Playback mode one time, all song repeat,one song repeat.
Noise decrease measure
Case:Takachi SW-120B(60x120x24 mm)
Electric power consumption approximately 170mW
Source schematic 1, 2 Hex file (Sorry,Tr is not BRC133 but BCR133. The capacitor connecting to Atmega8_pin21 is 0.1uF. )
Practical machine 3
1.部分资源来自网络,经ET电子归类整理,旨在服务电子爱好者并无商业目的,不保证正确性与完整性.
2.如果您觉得本站资源对您有用,请告知您的好友,用搜索引擎搜"ET电子"即可.